Mad Creations ATL traveled to New Orleans for the vertical door installation on this Sebring Orange Chevrolet Corvette C8 owned by @kingpeter87.

The orange bodywork is paired with black wheels, dark hood graphics and a rear spoiler. The build features the Vertical Doors, Inc. VDCCHEVYCORC820 conversion, retaining the original Corvette doors with vehicle-specific hinges that allow outward movement followed by vertical lift.

VDI Support Promise

We are here to help before, during, and after your purchase.

Our team can help with product fitment, installation questions, adjustments, operation, and replacement components when needed.

Sebring Orange Corvette C8 Build Details

  • Vehicle: Chevrolet Corvette C8 Stingray
  • Exterior: Sebring Orange
  • Owner: @kingpeter87
  • Installer: Mad Creations ATL
  • Installer's home base: Atlanta, Georgia
  • Featured installation location: New Orleans, Louisiana
  • Visible details: Black wheels, dark hood graphics and a rear spoiler
  • Door conversion: Vertical Doors, Inc.
  • Featured kit: VDCCHEVYCORC820

New Orleans Corvette C8 Photo Gallery

The gallery shows the finished Corvette from the front, side and rear. The side view makes the raised-door profile easy to see, while the front views show the dark hood graphics against the Sebring Orange finish.

Sebring Orange Corvette C8 owned by kingpeter87 with vertical doors installed by Mad Creations ATL

Rear three-quarter view of kingpeter87's Sebring Orange Corvette C8 with a raised vertical door and black wheels

Side view of the Sebring Orange Corvette C8 with its vertical door raised after the New Orleans installation

Low front view of the Sebring Orange Corvette C8 with dark hood graphics and both vertical doors raised

Sebring Orange Corvette C8 Video

Owner and Installer Credits

Owner: @kingpeter87.

Installer: Mad Creations ATL, with credits to @thecarstylist and @madcre8tions.

Mad Creations ATL is based in Atlanta, Georgia. This featured project was completed during a trip to New Orleans. Contact the installer directly to ask about current service areas and travel availability.

The installation shown was performed by an independent third-party installer. Confirm labor pricing, scheduling and workmanship terms directly with the installer. Vertical Doors, Inc. is not responsible for third-party installation labor or damages.

Corvette C8 Stingray Vertical Door Kit Details

Manufacturer Vertical Doors, Inc.
Part Number VDCCHEVYCORC820
Vehicle Chevrolet Corvette C8 Stingray
Confirmed Model Years 2020, 2021, 2022, 2023, 2024, 2025, 2026 and 2027
Product Type Vehicle-specific Vertical Door Conversion Kit
Kit Type Vehicle-specific bolt-on hinge conversion
Door Movement Opens outward first, then raises vertically
Original Corvette Doors Retained
Mounting Factory hinge bolt locations
Main Hinge Construction 3/8-inch and 1/2-inch domestic steel components
Manufacturing Made in the USA

Choose the Correct Kit for Your Corvette C8

The original feature identifies the installed kit as VDCCHEVYCORC820. For a new purchase, confirm your Corvette model, wheel dimensions and modifications using the current guidance below.

Model Model Years Fitment
C8 Stingray 2020-2027 Standard Stingray: Use VDCCHEVYCORC820.

Modified Stingray: Use VDCCHEVYCORC823Z06 if equipped with a widebody kit, air-bag suspension or wheels measuring 21 inches or larger.
C8 Z06 2023-2027 Use VDCCHEVYCORC823Z06.
C8 E-Ray 2024-2026 Use VDCCHEVYCORC823Z06.
C8 ZR1 2025-2027 Use VDCCHEVYCORC823Z06.
C8 ZR1X 2026-2027 Use VDCCHEVYCORC823Z06.
C8 Grand Sport 2027 Use VDCCHEVYCORC823Z06.
C8 Grand Sport X 2027 Use VDCCHEVYCORC823Z06.

Shop the C8 Stingray Vertical Door Kit

Product: Chevrolet Corvette C8 Stingray Vertical Door Conversion Kit
Part Number: VDCCHEVYCORC820

A Stingray with a widebody kit, air-bag suspension or wheels measuring 21 inches or larger requires VDCCHEVYCORC823Z06. Send us the details of your current setup before ordering.

Shop the Stingray Kit Compare C8 Door Kits

Door Movement and Installation

The original Corvette doors open outward first, then raise vertically with gas-shock assistance. The vehicle-specific hinges use the factory hinge bolt locations.

Installation requires properly supporting the doors, removing the fenders for access, completing required non-visible trimming and checking wiring clearance. Hinge adjustment, latch engagement, panel gaps and full door travel must be verified as part of the completed installation.

Corvette C8 Installation Options

Ask about installation at Vertical Doors, Inc. in Lake Elsinore, California, or explore independent shops in our directory. If you want to work with Mad Creations ATL, contact the installer directly for current location coverage, pricing and scheduling.

Contact us with your vehicle details before ordering or scheduling installation.

Request Installation Find a VDI Installer Installation Information

More Corvette C8 Customer Builds

See another example in the same exterior color in our Sebring Orange Corvette C8 feature from California.

Browse the Chevrolet Corvette C8 collection for more products and C8 applications.

Want Your Corvette Featured?

Tag #verticaldoors and #lambodoors, and mention @verticaldoors when sharing your installation. We would love to feature your Corvette on our website and social media.

Send your photos or video with the vehicle details, installation location and credits for the owner, installer and photographer.

Submit Your Corvette Join the VDI Family