VDCDC11REAR is the Vertical Doors, Inc. vehicle-specific Rear Vertical Door Conversion Kit for the 2011-2023 Dodge Charger rear doors of the 4-door sedan. The system retains the vehicle's original rear doors and creates the traditional VDI movement: each converted door opens outward first, then raises vertically. This conversion is also commonly described as a Lambo door kit or scissor door kit.
Make the Full Side of the 2011-2023 Dodge Charger Part of the Conversion
The LD Charger has a long four-door profile, pronounced rear shoulders, and rear doors that remain visually prominent even on performance models.
A rear conversion creates a more complete show display and requires the correct front-before-rear opening sequence during every use.
The vehicle-specific VDCDC11REAR system is listed for the 2011-2023 Dodge Charger application described on this page. It uses the original doors and a vehicle-specific hinge system instead of a universal weld-on conversion.
Carry the Charger's vertical-door theme through the complete sedan body.
- Manufacturer: Vertical Doors, Inc.
- Part Number: VDCDC11REAR
- Product Type: Rear Vertical Door Conversion Kit
- Vehicle: Dodge Charger
- Model Years: 2011-2023
- Generation: Second-generation modern Dodge Charger sedan
- Platform: Chrysler LD platform
- Body Style: rear doors of the 4-door sedan
- Manufacturing: Made in the USA
The VDI Support Promise
We are here before, during, and after your purchase.
Vertical Doors, Inc. can help with fitment questions before you order, installation guidance while the kit is being installed, and product support after the conversion is complete.
You are purchasing this system directly from Vertical Doors, Inc., the company that manufactures, supports, and stands behind it. If you have a question about fitment, installation, adjustment, replacement parts, or the product itself, the VDI team is here to help.
For current support hours and contact options, call 951-245-8669 or contact the VDI team.
2011-2023 Dodge Charger Fitment
This kit is designed to convert the two rear doors of the 2011-2023 Dodge Charger sedan range listed by VDI.
The front doors must be opened before the rear doors to avoid contact and damage. This rear system is separate from the Charger front-door kit.
Required rear-door opening sequence: Open the front door before opening the rear door. Reversing that sequence can allow the doors to contact each other and cause damage.
Important fitment note: Model, trim, package, engine, drivetrain, platform, and edition names help identify vehicles sold within the listed range. They do not confirm that every configuration automatically uses the same VDI hinge application. Confirm the model year, exact body style, and door configuration before ordering when fitment is uncertain.
Contact Vertical Doors, Inc. first if the vehicle has aftermarket fenders, widebody components, custom bodywork, previous collision repair, a body conversion, replacement hinges, or another modification near the hinge and fender area.
Chassis / Platform and Trim Guide
- Generation: Second-generation modern Dodge Charger sedan
- Chassis / Platform: Chrysler LD platform
- Body Style: rear doors of the 4-door sedan
- Principal trims and models: SE, SXT, GT, R/T, Scat Pack, SRT 392, and Hellcat models; availability varies
- Packages and configurations: Widebody, Jailbreak, engines, drivetrains, and appearance groups are configurations or packages
Fitment note: The front doors must be opened before the rear doors to avoid contact and damage. This rear system is separate from the Charger front-door kit.
Chassis, platform, trim, engine, drivetrain, body style, and package terminology is provided to help identify the vehicle. It does not expand the confirmed VDI application or guarantee fitment. Contact Vertical Doors, Inc. with the model year, exact model, body style, door configuration, and clear photographs when uncertain.
What Comes in the Kit
- One driver-side rear-door Vertical Doors, Inc. hinge assembly
- One passenger-side rear-door Vertical Doors, Inc. hinge assembly
- Two gas shocks
- Required mounting hardware
- Vehicle-specific installation instructions
Your purchase also includes access to Vertical Doors, Inc. fitment, installation, adjustment, operation, and replacement-parts support.
How the Rear Vertical Door Conversion Works
After installation, open the converted Charger rear door outward until it reaches the hinge system's stopping point, then raise it vertically. The gas shock assists during the upward movement.
Required rear-door opening sequence: Open the front door before opening the rear door. Reversing that sequence can allow the doors to contact each other and cause damage.
Proper installation and adjustment are essential for door alignment, latch operation, wiring clearance, surrounding panel clearance, and consistent opening and closing.
Installation Requirements
The VDI hinge system is designed around the vehicle's factory hinge area. Bolt-on describes the vehicle-specific mounting design; it does not mean the installation is modification-free. Installation commonly requires body-panel removal, non-visible trimming or clearance work, wiring management, and careful final alignment.
Before loosening or removing the original hinges, use 2-inch painter's tape to mark the door's factory alignment. Place tape across the door and adjacent body at several reference points, including near the hinges and firewall, then draw matching alignment lines across the tape. These marks help preserve the door's original horizontal and vertical position during installation.
- Support each door safely throughout the installation.
- Follow the supplied instructions for hinge stops, gas-shock installation, wiring, and panel clearance.
- Check the latch, weather sealing, wiring, and surrounding body panels before road use.
If you are not experienced with door alignment, drilling or tapping where applicable, body-panel removal, trimming, and wiring clearance, use a qualified automotive customization or body shop.
Before You Order
- Verify that the vehicle matches the 2011-2023 Dodge Charger listing and body style described above.
- Confirm the exact model year and door configuration.
- Review every platform, generation, production-year, or body-style note on this page.
- Tell VDI about aftermarket fenders, widebody components, custom bodywork, previous collision repair, replacement hinges, or modifications near the hinge area.
- Review the current shipping and return policies before purchasing.
- Call Vertical Doors, Inc. at 951-245-8669 when fitment is uncertain.
Frequently Asked Questions
Is VDCDC11REAR a universal Lambo door kit?
No. VDCDC11REAR is a vehicle-specific Vertical Doors, Inc. application for the listed 2011-2023 Dodge Charger. It is not a universal weld-on hinge system.
Does VDCDC11REAR fit every Dodge Charger trim and body style?
No blanket all-trim or all-body claim should be made from the model name alone. Match the exact model year, body style, and door configuration to the VDI listing and contact VDI when anything is uncertain.
What chassis or platform is associated with this vehicle range?
The vehicle history for this listing is associated with Chrysler LD platform. Platform information helps identify the vehicle but does not prove that another model on the same architecture uses this kit.
Does the conversion replace the factory doors?
No. The original rear doors are retained. The VDI hinge assemblies and gas shocks change how the converted doors move.
How do the converted doors open?
The converted doors open outward first to the hinge system's stopping point and can then be raised vertically with assistance from the gas shocks. Open the front door before the rear door every time.
Is trimming or adjustment required?
Yes. Installation commonly requires body-panel removal, non-visible trimming or clearance work, wiring management, hinge adjustment, and careful final door alignment.
Can I install VDCDC11REAR myself?
A mechanically experienced person with the proper tools, safe workspace, patience, and door-alignment experience may install the kit. Use a qualified installer if you are not comfortable with body-panel removal, trimming, wiring clearance, hinge adjustment, and final alignment.
Can the vehicle be returned to factory hinges?
The original doors and factory hinges can generally be reinstalled, but trimming, drilling, tapping, or other application-specific work may need repair if an exact factory restoration is required.
Can Vertical Doors, Inc. help after I buy the kit?
Yes. VDI provides fitment, installation, adjustment, operation, replacement-parts, and product support before, during, and after the purchase.
Browse all Dodge Vertical Door Kits or contact Vertical Doors, Inc. for fitment help before ordering.
“Before I had to put my car out there! Now they see the doors up they come to me!!!”
“Having Vertical Doors products is a must have to elevate your build to a whole different level. The amount of customer service and support they give back to their clients is amazing. Highly recommended.”
“I was having trouble with my C8 Door after a terrible attempt at install by another company (Eikon Motorsports). I called Vertical Doors and Danny was able to be a hugeeeee help. He got me in right away, told me exactly what the problem was, knowledgeable, extremely responsive, and communicated with me the whole way through. I cant say enough of the team there. I wish I would have come to them in the first place.”
Ordered my 2018 SS Camaro kit during the COVID crises. The team worked hard to get my kit to me during this critical time. I am so pleased with the new look. It took my Camaro to a new level. Great craftsmanship and best kit anywhere. - TJ from Florida
I have ordered and self installed a C7 Corvette Vertical door kit on my convertible. The kit is a top quality product and great tech help if needed. I am looking forward to doing a C8 install later this year. Just waiting on my Corvette to be made and delivered.
