Eric’s Atlas Blue 2024 Ford Mustang GT convertible brings together Air Lift 3H air suspension, silver multi-spoke wheels, RTR exterior pieces, and a Vertical Doors, Inc. Vertical Door Conversion Kit. Our team installed the VDCFM24 kit at our Lake Elsinore, California facility, giving this S650 Mustang a different way to show off its original doors.
The black soft top, red brake calipers, and low stance give the blue bodywork plenty of contrast. With both doors raised, you also get a look at the black interior and red accents. Eric, known as @suprs650, has put together a build with details worth looking at from every angle.
VDI Support Promise
We are here to help before, during, and after your purchase.
Vertical Doors, Inc. can help confirm vehicle fitment, the correct part number, and available installation options. Product and installation support is available directly from the company that manufactures the kit. Our team is also available to help with adjustments, operation, and replacement-component questions.
Eric’s Ford Mustang Build Details
- Owner: Eric, @suprs650 on Instagram and Threads
- Vehicle: 2024 Ford Mustang GT, S650 generation
- Body style: Two-door convertible with a black soft top
- Exterior: Atlas Blue
- Interior: Black with red accents
- Visible details: Silver multi-spoke wheels, red brake calipers, front splitter, side skirts, and rear wing
- Suspension: Air Lift 3H air suspension
- Product: Vertical Doors, Inc. Vertical Door Conversion Kit
- Part number: VDCFM24
- Door-kit installation: Vertical Doors, Inc.
- Installation location: Lake Elsinore, California
- Club: Extreme Stangz, @extremestangz_
Atlas Blue, Air Suspension, and Doors Up
The side profile shows how much the stance contributes to this Mustang. The silver wheels sit close to the fenders, while the splitter and side skirts follow the lower edge of the car. The raised doors add height above that low profile without replacing the Mustang’s original door panels.
From the rear, the black wing and soft top frame the Atlas Blue paint. Eric’s Extreme Stangz window graphic adds another personal detail, and the red calipers carry the accent color outside the cabin.
Eric’s Mustang Video
Eric’s Mustang is also featured in the original Vertical Doors, Inc. video below.
Eric’s Reported Modification List
Eric’s original build information credits Tune Time and EM&JB Customs for work on the broader project. The Vertical Door Kit installation was completed by Vertical Doors, Inc. in Lake Elsinore.
Engine Bay
- K&N air filters
- UPR oil catch can separator
- Paint-matched engine plenum cover, listed as RPl in the original build information
- SR Performance front strut brace
- Mishimoto coolant expansion tank
A ProCharger was listed as a planned addition in the original build information. It is not listed here as an installed modification.
Exterior
- Vertical Doors, Inc. Vertical Door Conversion Kit
- RTR chin splitter, side skirts, grille, and rear skirts
- DAR Performance Style wing
- Form Lighting LED side markers
- OPT7 URA Pro LED underglow
Interior and Audio
- Carbon Addons red carbon accents
- TR pedal cover and gear shift knob
- Fitcamx 4K dash camera
- 10-inch Kicker L7T subwoofers
- Arc Audio amplifiers
Suspension and Exhaust
- Air Lift 3H air suspension
- Pedders and BMR components, including sway bar links and a rear toe kit, as listed in the original build information
- American Muscle rear camber kit
- Borla S-Type axle-back exhaust
- Roush resonator-delete H-pipe
Third-party shops operate independently and are not employees, agents, or representatives of Vertical Doors, Inc. Discuss third-party labor pricing, scheduling, workmanship terms, and installation-related concerns directly with the shop. Vertical Doors, Inc. is not responsible for third-party labor charges, workmanship, damage, scheduling, or installation-related concerns. Our team remains available for VDI product questions and support.
How the Mustang Vertical Door Conversion Works
The VDCFM24 system retains the original front doors. Each converted door opens outward first, then raises vertically with gas-shock assistance. This is a traditional Vertical Door Conversion Kit, commonly called a Lambo door kit or scissor door kit.
Correct installation and adjustment matter for door alignment, latch operation, wiring clearance, and surrounding panel clearance. The S650 application also requires drilling and fitting the supplied upper and lower fender brackets. A vehicle-specific mounting design does not mean the installation is free of trimming or other preparation.
Ford Mustang Vertical Door Kit Details
| Manufacturer | Vertical Doors, Inc. |
|---|---|
| Part Number | VDCFM24 |
| Product Type | Vehicle-specific Vertical Door Conversion Kit |
| Original Doors | Retained |
| Door Movement | Opens outward first, then raises vertically |
| Manufacturing | Made in the USA |
Vehicle Fitment
The VDCFM24 Vertical Door Conversion Kit is available for the Ford Mustang S650 applications listed below. Confirm the exact trim, body style, and any modifications before ordering.
| Model | Model Years | Fitment |
|---|---|---|
| Ford Mustang S650 | 2024, 2025, 2026, 2027 | VDCFM24. Two-door fastback or convertible applications; confirm the exact body and configuration. |
Contact our team before purchasing if your Mustang has aftermarket fenders, widebody components, previous collision repairs, replacement hinges, or custom work around the hinge area. Model and trim names alone do not establish compatibility with every configuration.
Shop the Ford Mustang Vertical Door Kit
Product: Ford Mustang S650 Vertical Door Conversion Kit
Part Number: VDCFM24
Ford Mustang Installation Options
Request installation at Vertical Doors, Inc. in Lake Elsinore, California, or contact our team to discuss options for your Mustang and location. Scheduling and available installation services depend on the vehicle, location, and installer availability.
For product and installation questions, call 951.245.8669 or email sales@verticaldoors.com.
How Was Your Experience with Vertical Doors, Inc.?
Tell us about your kit, installation, or experience with our team. Your honest feedback helps other owners know what to expect and helps us improve.
Leave a Google ReviewExplore the Product Collection
More Ford Mustang Customer Builds
See Clinton’s 2024 Ford Mustang GT installation in Lake Elsinore for another S650 build using VDCFM24. Visit the Ford Mustang collection to find kits for other Mustang generations.
Want Your Ford Mustang Featured?
Tag #verticaldoors and #lambodoors, and mention @verticaldoors when sharing your installation. We would love to feature your Ford Mustang on our website and social media.
