Lambo Door Installation Tech Tips

1. Do not take Door off during installation.  Please follow the detailed instruction manual step by step.

2. Make sure the mounting surface is flat as possible.  If necessary, grind the surface so the vertical door kit can sit and mount flat.

3. Make sure both allen screw adjustment on each system are adjusted accordingly.

4. The kit requires no modification.  The kit is a bolt on, but MOST INNER FENDERS MUST BE ROLLED.

For Tech Support, please contact our tech support department at 951.245.8669 M-F 8:30 AM - 4:30 PM (Pacific Standard Time).  Before you call, please have all questions ready to ask.  We are more than happy to answer any technical problems.

Click Here to see more Tech Tips



September 17, 2019 — Omar Anguiano

Leave a comment

Please note: comments must be approved before they are published.