Jacob's @im_jiggin Nissan 300ZX from Georgia featuring Vertical Lambo Doors Conversion Kit VDCN300ZX9099 from Vertical Doors, Inc.

Posted by Armando Anguiano on

Jacob's @im_jiggin Nissan 300ZX from Georgia featuring Vertical Lambo Doors Conversion Kit VDCN300ZX9099 from Vertical Doors, Inc.

Instagram: @im_jiggin
Facebook: jacob.franklin.37
Photographer: @buskiphoto
My crew: @therealdirtysouthboys - Dirty South Boys since 2016

Jacob's @im_jiggin Nissan 300ZX from Georgia featuring Vertical Lambo Doors Conversion Kit VDCN300ZX9099 from Vertical Doors, Inc.Jacob's @im_jiggin Nissan 300ZX from Georgia featuring Vertical Lambo Doors Conversion Kit VDCN300ZX9099 from Vertical Doors, Inc.Jacob's @im_jiggin Nissan 300ZX from Georgia featuring Vertical Lambo Doors Conversion Kit VDCN300ZX9099 from Vertical Doors, Inc.
-Paint by @pride_detailing1 some of -suspension by @partsshopmax & @bcracingusa
- motor and miscellaneous parts for motor from @driftmotion1 -Powder coat work by @premierwheelatl -fabrication stuff by @rrfab.hunter

1990 Nissan 300ZX 2+0 non turbo chassis

•1Jz gte non vvti swapped single turbo:
-BC stage 2 cams
-Drift Motion s14 front mount intercooler -Cxracing s13 ka radiator -valves cut to match cams -Bc steel springs and retainers -fully ARP studded -Acl race bearings main and rod -rev 9 72/68mm turbo -55mm waste gate -Drift Motion 2GZGTE high-pressure oil pump -2jz gte water billet wheel water pump -GEN “1” R154 transmission with shifter extension to get it to factory location inside chassis -MSD stage 4 6 puck clutch -custom one piece steel drive shaft

•Front Suspension:
-BC racing Extreme low custom valving coilovers (240sx lower cups on rear coils) & spring rates of 24k fronts & 22k rears
-Z1 front upper control arms race series
-240 SX front lower control arms fully adjustable with tension rod
-z32 outer tie rod from Megan Racing
-S14 inner tie rods

•Rear Suspension:
-CXracing rear upper control arms

-PBM or partshopmax S chassis rear drop knuckles w/ a working factory emergency brake

•Wheels setup & specs:
SSR Vienna Kreis
Fronts 18x10.5 +0 (225/35/18)
Rears 18x11 -2 (225/40/18)
-I have the 10mm extended lug studs and the 10mm slip over hubcentric spacers to clear calipers

•Exterior:
-SSR Vienna Kreis
-KBD front bumper gready style
-KBD BN style 240sx side skirts cut to fit -JPFiberglass custom rear bumper valance - one exhuast exit port to go with the jz swap -BCL 1700mm wing (UNIVERSAL ATMOSPHERE DEMOLISHER) -DEPO clear front & rear running lights -Quick latches for my hood & front bumper

•Interior:
-Auto Power bolt in half cage (powder coated glacier white) -Grip Royal 330mm steering wheel - white -NRG 3.0 black wing Quick release -NRG z32 hub -PBM/partshopmax shift knob -white

•Seats:
-Driver (OMP HTE halo bucket seat)
-Passenger (TF Works TF sparkle seat)
*The seats are mounted with Bride FO type rails with sliders* -Braum 5point harness for driver & 4 point harness for the passenger


Nissan 300ZX 1990-1999 Lambo Door Conversion Kit by Vertical Doors Inc.
Part Number: VDCN300ZX9099

This kit will fit NISSAN 300ZX ALL 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Vertical Doors, Inc. is the only manufacturer of Vertical Lambo Doors and ZLR Door Conversion in the USA.

#nissan300zx #nissan #300zx #zcar #fairladyz #zcar #z31 #z32 #jdm #VerticalDoorsInc #LamboDoors #VerticalDoors #MadeintheUSA #USA #doors #love #happy #picoftheday #repost #style #swag #work

If you have our product we would like to feature your car, please send Pictures, Videos, Car Shows, Events and Updates to social@verticaldoors.com
Sales 951.245.8669



Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.