Gift Certificate

Tech Tips

Lambo Door Installation Tech Tips

1. Do not take Door off during installation.  Please follow the detailed instruction manual step by step.

2. Make sure the mounting surface is flat as possible.  If necessary, grind the surface so the vertical door kit can sit and mount flat.

3. Make sure both allen screw adjustment on each system are adjusted accordingly.

4. The kit requires no modification.  The kit is a bolt on, but MOST INNER FENDERS MUST BE ROLLED.

For Tech Support, please contact our tech support department at 951.245.8669 M-F 8:30 AM - 4:30 PM (Pacific Standard Time).  Before you call, please have all questions ready to ask.  We are more than happy to answer any technical problems.


Adjust the Door Striker and Lock it in place

Make sure to adjust the striker poperly and to lock it in place after the installation, if the locking nut is not locked in place the bolt will come loose and the door will fall out of adjustment.

The striker should look like the image below "IMAGE 1" and the sound of the door should be very close to the original sound it make with the factory door hinges.

IMAGE 1

Adjust the Vertical Doors, Inc. Door striker

If the door is to HIGH

you will have to lower the door by turning the adjustment screw counter-clockwise until the stricker is align just like the "IMAGE 1". 

IMAGE 2

Adjust the Vertical Doors, Inc. Door striker

If the door is to LOW

you will have to raise the door by turning the adjustment screw clockwise until the stricker is align just like the "IMAGE 1". 

IMAGE 3

Adjust the Vertical Doors, Inc. Door striker

Lock the door in place

After adjusting the door striker, make sure to lock the locking nut into place to avoid the adjustment screw from becoming loose. 

IMAGE 4

Adjust the Vertical Doors, Inc. Door striker


Shock Info

Please Note: You cannot compress the shocks by hand. The shock has 450Lbs - 800Lbs of pressure per square inch. They will not compress until installed on the hinge.

/_product_pics/important_shock_information.jpg

 

2003 - 2005 Hummer H2

Use cutting wheel and cut to make look like in picture


Installation on a Chevrolet Corvette C5 1997-2004

Chevrolet Corvette C5 1997-2004 Lambo Door Kit Installation Part 1

Chevrolet Corvette C5 1997-2004 Lambo Door Kit Installation Part 2


Installation on a Hyundai Genesis Coupe 2009 - 2015

Hyundai Genesis Coupe Lambo Door Installation Part 1

Hyundai Genesis Coupe Lambo Door Installation Part 2


Installation of the Rear Lambo doors on a Dodge Charger


All Tech Tips and images on this site and/or in the Printed instructions are for refence only. Your vehicle may be different and they may not apply to your vehicle. Vertical Doors Inc. assumes no responsibility for any damages caused by improper installation.



CHAT WITH US

Languages

English  Spanish  

Sponsors